HOPPE Mortice Escape Lock. Face Plate Finish: F77 Brass-coloured, Polished. Shape: Radiused

ARRONE euro profile mortice escape lock case:

• Single action escape function internally on external final escape doors
• 60 mm backset, 72 mm centres, case pierced to accept bolt through furniture and escutcheons at 38 mm centres, fixed square forend
• Single throw 20 mm projection deadbolt.
• AR228F half spindle and AR914/915-HS-Plate available for use with half sets of levers
• Included in a successful fire test to BS EN 1634 Part 1: Assessed for use on 30, 60, 90 and 120 minutes timber fire doors and 240 minutes steel fire doors.
• CE Marked: Certificate: 1121-CPR-AG0165 (BS EN 12209) and 1121-CPR-ABB010 (BS EN 179)
• CPR Declaration of Performance: HUK0012 and HUK0035 (See Service section)
• Certifire approved: Certificate CF530
• To comply with BSEN179 certification, only lever handles and associated fixings included in the test evidence must be used.
• Meets dimensional recommendations of BS 8300 and ADM for locks
• * The AR900 series lock case has been successfully fire tested with the use of an intumescent kit. The supply and fitting of this intumescent kit is essential to the products compliance with the fire test and CE marking evidence it has gained. HOPPE takes no responsibility for any locks purchased and fitted without sufficient intumescent protection.